HARRIS lincoln electric

 

TRAKMAX Model 622

Description: The TRAKMAX Model 622 tractor is the first ever precision belt driven tractor. The precision belt on the tractor eliminates gear lash resulting in a significantly smoother operation without any lost motion. The precision belt is an innovative, new generation drive system that replaces and outperforms the friction or gear drive.

The TRAKMAXTM is capable of performing multi-applications including oxy-fuel, welding, and plasma.  Optional accessories allow for the use of two torches simultaneously which can cut a double bevel in a single pass. Types of cuts include square/straight, V bevel, Y bevel, X bevel, and K bevel. The design of the tractor makes counter weights almost obsolete. Unlike competitive models, which would require the purchase of two tractors, the TRAKMAXTM comes standard with dual range speed control for infinite speed control from 0 – 40 IPM and 0-110 IPM making it one of the fastest tractors available in the market.

 

Features:The TRAKMAXTM features an all metal construction including steel, aluminum, brass, and stainless steel. The TRAKMAXTM has a welded steel, unibody construction and a frame that is integral to the design of the machine (not just a cover). It has stainless steel drive wheels and casters are corrosion and abrasion resistant resulting in a longer lasting wheel. The large diameter drive wheels are knurled for positive traction. The caster wheels can be locked into position in-line with the drive wheels for straight line cutting – even without the track.

The TRAKMAXTM is equipped with full profile heat shields mounted on each side of the tractor to protect from overheating of motor and solid state circuitry board when engaged in heavy capacity cutting or when machine is close to work.

The TRAKMAXTM is equipped with an industry leading motor torque generated from a 130 volt DC with integral transmission. The transmission is lubricated with synthetic lube rated for up to -20°C and that has an average service life to over 10,000 hours. Dual voltage (110/220 volt) models are available.

Technical Details:

Cutting Capacity: 30″ with appropriate torch equipment
Circle Cutting Range: 2 – 54″ / 50.8 – 1371.6 mm (with optional accessory sold separately)
Speed Range: 0 – 40 IPM / 0 – 110 IPM
Carrying Load Maximum: 800 lbs / 362.88 kg
Weight: 30 lbs / 13.6 kg
Length: 15″ / 381 mm
Height: 6 3/8″ / 161.92 mm
Power Requirement: 120V, 1 amp (maximum), 50/60 Hz, Single Phase

Deluxe Package Includes:

• Heavy Duty Portable Cutting and Welding Tractor P/N: QC2SCM2575
Rigging:
• 25′ molded, detachable electrical cord that is both oil and water resistant
• 3-hose Hose Block for use with 2 hose and 3 hose torches
• 24″ Gear Rack with cross slide for horizontal movement
• Torch Holder for mounting 1 3/8″ diameter machine cutting torches and controlling the vertical movement of the torch
• Mounting Block to attach the torch holder to gear rack
• 3′ twin, grade T, WIP welding hose to attach the torch to the hose block
• 6′ heavy duty v-grooved carbon steel track with spray galvanized finish. Track is designed with a male and female ends for easy coupling of two or more tracks.

Full profile heat shields mounted on each side of the tractor to protect from overheating of motor and solid state circuitry board when engaged in heavy capacity cutting or when machine is close to work surface.

Part Model Description
CQ2SCM2524 622 Portable track machine, int. Trakpak package 6 includes machine, standard rigging, 6ft track, 98-6 machine torch- export 220v
QC2SCM2520 622 Portable track machine, international Trakpak package 4 includes machine & standard rigging- export 220v
QC2SCM2522 622 Portable track machine, international Trakpak package 5 includes machine, standard rigging, 6ft track- export 220v
—————————————————————————————————————————————————————————————-

Auto Picle-S

Description: Pipe cutting machine Auto Picle-S (without transformer)

Part Number Model Number Description Weight Outside Diameter
90117 Auto Picle-S Pipe cutting machine (without transformer) 15,0 kg 150 – 600 mm with standard chain

 


Cutweld

Description: Portable pipe cutting machine

Part Number Model Number Description Weight Inside Diameter
907310 Cutweld I Portable pipe cutting machine Cutweld I with manual drive 8,7 kg 70 – 120 mm
907311 Cutweld I Portable pipe cutting machine Cutweld I with electric drive 13,7 kg 70 – 120 mm
907320 Cutweld II Portable pipe cutting machine Cutweld II with manual drive 13,2 kg 110 – 260 mm
907321 Cutweld II Portable pipe cutting machine Cutweld II with electric drive 18,2 kg 110 – 260 mm
907330 Cutweld III Portable pipe cutting machine Cutweld III with manual drive 15,4 kg 250 – 410 mm
907331 Cutweld III Portable pipe cutting machine Cutweld III with electric drive 20,4 kg 250 – 410 mm
907340 Cutweld IV Portable pipe cutting machine Cutweld IV with manual drive 9,8 kg 600 – 1000 mm with steel bands
907341 Cutweld IV Portable pipe cutting machine Cutweld IV with electric drive 14,8 kg 600 – 1000 mm with steel bands  

 

Part Number Operating Range Cutting Speed Power Connection
907310 3 – 50 mm 0 – 700 mm/Min.
907311 3 – 50 mm 0 – 700 mm/Min. 230V
907320 3 – 50 mm 0 – 700 mm/Min.
907321 3 – 50 mm 0 – 700 mm/Min. 230V
907330 3 – 50 mm 0 – 700 mm/Min.
907331 3 – 50 mm 0 – 700 mm/Min. 230V
907340 3 – 50 mm 0 – 700 mm/Min.
907341 3 – 50 mm 0 – 700 mm/Min. 230V

 


 

Picle-1

Description: Pipe cutting machine

                  

 

Part Number Model Number Description Weight Outside Diameter
90110 Picle-1 Pipe cutting machine Picle-1 8,5 kg 114 – 600 mm with standard chain

 

Part Number Operating Range
90110 5 – 50 mm

 


 

Harris Plus

Description: Harris Plus Cutting System

The Harris Plus is a more portable version of the Harris Super, designed with the same precision and capabilities

 

 

 

Features:

  • Straight line and circle oxy fuel cutting
  • Stepless Drive System, maintaining constant travel speed even with high temperatures and ensuring stable, trouble-free cutting
  • Light Weight -9.5 kg- easy to carry and use
  • Modular straight 1800 mm rail sections (to be ordered separately)
Part Number Model Number Description Style Weight Length Width
PCS-PLUS-42 Harris Plus Harris Plus Cutting System 42 V Acetylene 3 hose 9.5kg 360mm 140mm
PCS-PLUS-42F Harris Plus Harris Plus Cutting System 42 V Alternative fuel 3 hose 9.5kg 360mm 140mm
PCS-PLUS-110 Harris Plus Harris Plus Cutting System 110 V Acetylene 3 hose 9.5kg 360mm 140mm
PCS-PLUS-110F Harris Plus Harris Plus Cutting System 110 V Alternative fuel 3 hose 9.5kg 360mm 140mm
PCS-PLUS-220 Harris Plus Harris Plus Cutting System 220 V Acetylene 3 hose 9.5kg 360mm 140mm
PCS-PLUS-220F Harris Plus Harris Plus Cutting System 220 V Alternative fuel 3 hose 9.5kg 360mm 140mm

 

Part Number Fuel Gas
PCS-PLUS-42 Oxy-acetylene/Hydrogen
PCS-PLUS-42F Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
PCS-PLUS-110 Oxy-acetylene/Hydrogen
PCS-PLUS-110F Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
PCS-PLUS-220 Oxy-acetylene/Hydrogen
PCS-PLUS-220F Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene

 


 

Harris Super

Description: Harris Super Cutting System

The Harris Super is an innovative machine with a body structure systemized for different types of  gas fuel cutting and automatic welding work

 

 

Features:

  • Straight lin and circle cutting or welding
  • Double-cone stepless drive system, maintaining constant travel speed even with high temperatures and allowing greater speed control
  • Plate Rider Torch Option, automatically maintains torch distance during cutting
  • Modular straight 1800mm rail sections (ordered separately)
  • Circle rail Ø 40-360mm and Ø 1150-2400mm (ordered separately)
  • Speed meter dial indication with conversion scale
  • Cutting torch unit for square or V-bevel cutting, equipped with the Harris cutting torch model 198-4
  • Double or triple cutting torch unit available on request
Part Number Model Number Description Style Weight Length Width
PCS-SUPER-42 Harris Super Harris Super Cutting System 42 V Acetylene 3 hose 11kg 430mm 170mm
PCS-SUPER-42F Harris Super Harris Super Cutting System 42 V Alternative fuel 3 hose 11kg 430mm 170mm
PCS-SUPER-110 Harris Super Harris Super Cutting System 110 V Acetylene 3 hose 11kg 430mm 170mm
PCS-SUPER-110F Harris Super Harris Super Cutting System 110 V Alternative fuel 3 hose 11kg 430mm 170mm
PCS-SUPER-220 Harris Super Harris Super Cutting System 220 V Acetylene 3 hose 11kg 430mm 170mm
PCS-SUPER-220F Harris Super Harris Super Cutting System 220 V Alternative fuel 3 hose 11kg 430mm 170mm

 

Part Number Fuel Gas
PCS-SUPER-42 Oxy-acetylene/Hydrogen
PCS-SUPER-42F Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
PCS-SUPER-110 Oxy-acetylene/Hydrogen
PCS-SUPER-110F Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
PCS-SUPER-220 Oxy-acetylene/Hydrogen
PCS-SUPER-220F Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene

 


 

IK-12 Beetle

Description: Cutting machine IK-12 Beetle

                                   

 

Part Number Model Number Description Weight
90020 IK-12 Beetle Cutting machine with 1 torch 230V 9,5 kg
90022 IK-12 Beetle Cutting machine with 1 torch 42V 9,5 kg
90023 IK-12 Beetle Cutting machine with 2 torch 230V 13,0 kg
90025 IK-12 Beetle Cutting machine with 2 torch 42V 13,0 kg

 

Part Number Operating Range Cutting Speed Power Connection
90020 5 – 100 mm 150 – 800 mm/Min. 230V
90022 5 – 100 mm 150 – 800 mm/Min. 42V
90023 5 – 100 mm 150 – 800 mm/Min. 230V
90025 5 – 100 mm 150 – 800 mm/Min. 42V

 


 

IK-93T Edge-Cut

Description: Portable trackless Gas Beveling

Designed in cooperation with the shipbuilding industry to meet the need for simple, yet effective plate edge preparation. The Edge-Cut performs high quality single or double bevels without the need for a track. V-Grooves essential to full penetration welds can be performed with just one pass. Ease of set up and constant speed ensure high quality cutting even during long distant cutting. The Snap Valve allows pre-setting of flames to reduce set up time while reducing gas waste.

 

 

Features:

  • Trackles Beveling – Bevels plate edge top and bottom, up to 45 deg. without the need for track.
  • Pre-Set Flame – Unique Snap Valve allows saving flame settings and quickly turns gases on and off.
  • Specialized Torch Set – Designed to allow accurate bevels and quick set up of torches.
  • Pistol Shape Grip – Operator can control forward/reverse, clutch and speed adjustment with just one hand.
  • Multi Purpose Cutting – Performs straight line, hand guided and circle cutting.
Model Number Weight Length Availability
IK-93T Edge-Cut 12 kg 380 mm Germany

 

Operating Range Cutting Speed Power Connection
5 – 50 mm 100 – 1000 mm/min. 42V

 


 

IK-82 Series

Description: Joint arm cutting machine

 

Part Number Model Number Description Weight
90061 IK-82 S200 Joint arm cutting machine IK-82 S200 7,5 kg
90064 IK-82 M300 Joint arm cutting machine IK-82 M300 9,5 kg

 

Part Number Operating Range Cutting Speed Power Connection
90061 5 – 50 mm 100 – 900 mm/Min. 110V
90064 5 – 50 mm 100 – 600 mm/Min. 110V

 


Mini-Mantis II

Description: Mini-Mantis II with Burner unit

 

Part Number Model Number Description Weight
90131 Mini-Mantis II Mini-Mantis II with short Burner unit 15,0 kg

 

Part Number Operating Range Cutting Speed Power Connection
90131 5 – 30 mm 100 – 700 mm/Min. 110V

 


Wel-Handy Mini

Description: High speed welding driving car

Part Number Model Number Description Weight
90210 Wel-Handy Mini High speed welding driving car 7,0 kg

 

Part Number Cutting Speed Power Connection
90210 100 – 1000 mm/Min. 42V

 


WEL-HANDY MULTI-II WEAVING

Description: High speed welding driving car

Part Number Model Number Description Weight
90246 WEL-HANDY MULTI-II WEAVING High speed welding driving car 9,1 kg

 

Part Number Power Connection
90246 24V

 


Harris HA

Description: Harris HA Cutting System

Harris HA is a portable, hand cutting machine with integrated drive system, suitable as a hand-held cutter as well as an automated cutting machine. It allows the operator to cut all kinds of profiles in a simple and accurate manner.

Part Description Length Specification Cutting Tip
PCS-HA Harris HA 220 V 500mm Standard wheel: Attaches to machine body Propane: 8290-PNME(1-3) / Acetylene: 8290-ANME(1-3)
PCS-HA Harris HA 110 V 500mm Standard wheel: Attaches to machine body Propane: 8290-PNME(1-3) / Acetylene: 8290-ANME(1-3)

 

Part Number Operating Range Cutting Speed Power Connection Fuel Gas
PCS-HA 3 to 30 mm 200 to 700 mm/minute – Transistor Control 220 Volts, AC Oxy-acetylene/Hydrogen
Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
PCS-HA 3 to 30 mm 200 to 700 mm/minute – Transistor Control 110 Volts, AC Oxy-acetylene/Hydrogen
Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene

 


 

Handy Auto Plus

Description: Hand cutting machine Handy Auto Plus with electrical ignition

Part Number Model Number Weight
90001 Handy Auto Plus 3,5 kg

 

Part Number Operating Range Cutting Speed Power Connection
90001 5 – 50 mm 150 – 530 m/Min. 230/12V

 


 

Model 198-2TF

Description: Equal pressure machine cutting torch for alternative fuels

Harris machine cutting torches are designed to handle all types of machine cutting applications. Rugged and dependable, these torches provide up to 380 mm cutting capacity. Harris machine cutting torches are available in two tube and three tube design for all fuel gases at pressures as low as 0.015 bar.

 

Features:

  • Solid head for maximum strength
  • Standard 32 mm or 35 mm diameter barrel
  • All torches have inlet threads 9/16×18 UNF
  • Quick opening cutting oxygen valve for immediate full flow
  • Separate preheat and cutting oxygen valves for high and low preheat control
  • 3 tube design with optional rack (designated by R in the part number)
Part Model Style Barrel Weight Length Cutting Tip Mixing System
198-2TAF 198-2TF 3 tube 32 mm 1.64 Kg 460 mm 6290-VVC, 6290-VPM F
198-2TAF-30 198-2TF 3 tube 30 mm 1.55 Kg 460 mm 6290-VVC, 6290-VPM F
198-2TAF-35 198-2TF 3 tube 35 mm 1.78 Kg 460 mm 6290-VVC, 6290-VPM F
198-2TAF-35R 198-2TF 3 tube & rack 35 mm 1.90 Kg 460 mm 6290-VVC, 6290-VPM F
198-2TAFR 198-2TF 3 tube & rack 32 mm 1.76 Kg 460 mm 6290-VVC, 6290-VPM F
198-2TF 198-2TF 3 tube 32 mm 1.33 Kg 250 mm 6290-VVC, 6290-VPM F
198-2TF-30 198-2TF 3 tube 30 mm 1.20 Kg 250 mm 6290-VVC, 6290-VPM F
198-2TF-30R 198-2TF 3 tube & rack 30 mm 1.25 Kg 250 mm 6290-VVC, 6290-VPM F
198-2TF-35 198-2TF 3 tube 35 mm 1.43 Kg 250 mm 6290-VVC, 6290-VPM F
198-2TF-35R 198-2TF 3 tube & rack 32 mm 1.49 Kg 250 mm 6290-VVC, 6290-VPM F
198-2TFR 198-2TF 3 tube & rack 32 mm 1.39 Kg 250 mm 6290-VVC, 6290-VPM F

 

Part Number Fuel Gas
198-2TAF Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
198-2TAF-30 Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
198-2TAF-35 Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
198-2TAF-35R Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
198-2TAFR Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
198-2TF Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
198-2TF-30 Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
198-2TF-30R Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
198-2TF-35 Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
198-2TF-35R Oxy-natural Gas/Methane
Oxy-propane/Butane
Oxy-propylene
198-2TFR Oxy-propylene
Oxy-propane/Butane
Oxy-natural Gas/Methane

 


Model BV-98-2

Description: Bevelling Head

Cuts to 3 – 200 mm

Features:

  • Use with natural gas or propane only.
  • Increase speed and quality of bevel cuts.
  • 6290 cutting tips can be used.
  • Use specially designed 1390-3H replacement heating tip for optimum results.
Part Number Model Number
BV-98-2 BV-98-2

 


 

Model S-98-C

Description: Adjustable Tip Adapter

Cuts to 3 – 200 mm

Features:

  • Allows adjustment of tip to any angle without moving the torch “O” ring sealed.
  • Large capacity, (up to 200 mm) calibrated 90°.
Part Number Model Number
S-98-C S-98-C

 


 

Model TH-98

Description: Twin Tip Adapter

Cuts to 3 – 100 mm

Features:

  • Adjustable twin adapter for 2 cuts simultaneously using one torch.
  • Adjust from 30 mm to 305 mm wide (special widths available on request) “O” ring sealed.
  • Large capacity (up to 200 mm to each tip).
Part Number Model Number
TH-98 TH-98
TH-98-600 TH-98

 


 

Model 6290-VVC

Description: Machine cutting tip

High Speed Oxy-Methane and Natural Gas Cutting Tip – Plated Shell

 

Part Number Model Number Tip Seat Style
6290-00-VVC 6290-VVC Harris
6290-0-VVC 6290-VVC Harris
6290-01/2-VVC 6290-VVC Harris
6290-1VVC 6290-VVC Harris
6290-2VVC 6290-VVC Harris
6290-3/0-VVC 6290-VVC Harris
6290-3VVC 6290-VVC Harris
6290-4/0-VVC 6290-VVC Harris
6290-4VVC 6290-VVC Harris
6290-5/0-VVC 6290-VVC Harris
6290-5NH 6290-VVC Harris
6290-5VVC 6290-VVC Harris
6290-6NH 6290-VVC Harris
6290-7NH 6290-VVC Harris
6290-8NH 6290-VVC Harris
6290-11/2-VVC 6290-VVC Harris
6290-21/2VVC 6290-VVC Harris
6290-51/2VVC 6290-VVC Harris

 

Part Number Cutting Thickness Cutting Speed Heating Power Kerf Width Cutting O2 Pressure Preheat O2 Pressure Cutting O2 Flow Preheat O2 Flow Preheat Fuel Flow
6290-00-VVC 9-12.5 510-460 11000-4400 1.8 5 2.5-0.7 2540 2540-1000 1270-500
6290-0-VVC 12.5-20 460-330 11000-4400 2 6.5 2.5-0.7 3530 2540-1000 1270-500
6290-01/2-VVC 20-35 410-350 11000-5000 2 7 2.5-0.9 4000 2540-1130 1270-570
6290-1VVC 35-60 380-330 11000-5000 2.3 7 2.5-0.9 5560 2540-1130 1270-570
6290-2VVC 75-100 300-180 11000-5000 3 7 2.5-0.9 9000 2540-1130 1270-570
6290-3/0-VVC 6-9 560-450 11000-4400 1.8 5 2.5-0.7 2260 2540-1000 1270-500
6290-3VVC 150-175 180-125 12400-5000 3.5 7 2.5-0.9 12000 2830-1130 1420-570
6290-4/0-VVC 4-6 560-510 6200-4400 1.5 3.5 1.0-0.7 1130 1410-1000 710-500
6290-4VVC 175-200 180-125 12400-5000 4 7 2.5-0.9 14850 2830-1130 1420-570
6290-5/0-VVC 1-4 610-510 6200-3700 1.3 3 1.0-0.6 420 1410-850 710-430
6290-5NH 225-250 125-100 12400-8200 6.4 4 2.8-1.5 16980 2830-1880 1420-940
6290-5VVC 200-225 150-100 12400-6600 5 6.5 2.8-1.2 16410 2830-1510 1420-760
6290-6NH 250-275 120-100 12400-8200 6.4 4 2.8-1.5 19520 2830-1880 1420-940
6290-7NH 275-300 110-100 12400-11000 6.4 4.5 3.5-2.0 23340 2830-2510 1420-1260
6290-8NH 300-380 100-75 12400-11000 7.6 4.5 3.5-2.0 26170 2830-2510 1420-1260
6290-11/2-VVC 60-75 300-230 11000-5000 2.8 7 2.5-0.9 7070 2540-1130 1270-570
6290-21/2VVC 125-150 200-150 11000-5000 3.3 7 2.5-0.9 11170 2540-1130 1270-570
6290-51/2VVC 225-250 125-100 12400-7100 6.4 6.5 2.8-1.3 16980 2830-1630 1420-820

 


 

Model 847

Description: Pipeline regulator with one gauge

Typical Application:  High flow rate from industrial and laboratory pipeline points, heavy cutting and heating

 

 

Features:

  • High flow and outlet pressure (up to 15 bar) line regulator
  • Forged brass body for maximum strength
  • Sintered alloy inlet filter to trap impurities
  • Maximum inlet pressure 25 bar
  • 15 Lpm, 30 Lpm and 50 Lpm versions available for argon and CO2
Part Number Model Number Capacity Stage Gauges Gas Inlet Outlet Availability
847-1.5-AC Heavy Duty Single 63 mm Steel Acetylene
H1075 847 Acetylene UK
847AC Single Acetylene G1/2LH G3/8LH or G1/2LH Germany
847-15-L-AR Heavy Duty Single 63 mm Steel Argon
847-30-L-AR Heavy Duty Single 63 mm Steel Argon
847-50-L-AR Heavy Duty Single 63 mm Steel Argon
H1084 847 Argon UK
H1379 847 Argon UK
847Z097 Single Argon
Carbon Dioxide
G3/8RH G1/4RH Germany
847-10 Heavy Duty Single 63 mm Steel Argon
Carbon Dioxide
Helium
Hydrogen
Methane
Nitrogen
Compressed Air
847-15 Heavy Duty Single 63 mm Steel Argon
Carbon Dioxide
Helium
Hydrogen
Methane
Nitrogen
Compressed Air
847AR Argon
Carbon Dioxide
Mixed Gas
G1/2RH G3/8RH or G1/2RH Germany
847AR-15 Argon
Carbon Dioxide
Mixed Gas
G1/2RH G3/8RH or G1/2RH Germany
847-15-L-CD Heavy Duty Single 63 mm Steel Carbon Dioxide
847-30-L-CD Heavy Duty Single 63 mm Steel Carbon Dioxide
847-50-L-CD Heavy Duty Single 63 mm Steel Carbon Dioxide
847PL-15 Compressed Air G1/2RH G3/8RH or G1/2RH Germany
847PL Compressed Air G1/RH G3/8RH or G1/2RH Germany
847Z113 Single Forming Gas G3/8RH G1/4RH Germany
847H2-15 Hydrogen G1/2LH G3/8LH or G1/2LH Germany
847H2 Hydrogen G1/LH G3/8LH or G1/2LH Germany
847GN Nitrogen G1/2RH G3/RH or G1/2RH Germany
847GN-15 Nitrogen G1/2RH G3/8RH or G1/RH Germany
847-10-OX Heavy Duty Single 63 mm Steel Oxygen
847-15-OX Heavy Duty Single 63 mm Steel Oxygen
H1077 847 Oxygen UK
H1078 847 Oxygen UK
H1080 847 Oxygen UK
847OX Single Oxygen G1/2RH G3/8RH or G1/2RH Germany
847OX-15 Single Oxygen G1/2RH G3/8RH or G1/2RH Germany
847-4-LP Heavy Duty Single 63 mm Steel Propane
H1076 847 Propane UK
847PR Single Propane G1/2LH G3/8LH or G1/2LH Germany

 

Part Number Max Inlet Pressure Max Air Flow Delivery Pressure Range Delivery Pressure Gauge Height Width Length Pressure Cv
847Z097 30Lpm
847Z113 30Lpm
H1379 25
H1075 25 0 – 1.5 0 – 2.5
H1078 25 0 – 10 0 – 16
H1084 25 0 – 10 0 – 16
H1080 25 0 – 15 0 – 25
H1076 25 0 – 4 0 – 6
H1077 25 0 – 4 0 – 6
847-1.5-AC 25 bar 13 m³/h 0-1.5 bar 0-2.5 bar 165 mm 152 mm 78.4 mm 0-1.5 bar 1
847AC 25bar 13m³/h 0-1.5bar 0-2.5bar
847-10 25 bar 95 m³/h 0-10 bar 0-16 bar 165 mm 152 mm 78.4 mm 0-10 bar 1
847-10-OX 25 bar 95 m³/h 0-10 bar 0-16 bar 165 mm 152 mm 78.4 mm 0-10 bar 1
847AR 40bar 95m³/h 0-10bar 0-16bar
847GN 40bar 95m³/h 0-10bar 0-16bar
847H2 40bar 95m³/h 0-10bar 0-16bar
847OX 40bar 95m³/h 0-10bar 0-16bar 165mm 145mm 78.4mm
847PL 40bar 95m³/h 0-10bar 0-16bar
847-15 25 bar 135 m³/h 0-15 bar 0-25 bar 165 mm 145 mm 78.4 mm 0-15 bar 1
847-15-OX 25 bar 135 m³/h 0-15 bar 0-25 bar 165 mm 145 mm 78.4 mm 0-15 bar 1
847-15-L-AR 25 bar 0-15 Lpm 0-15 Lpm 165 mm 152 mm 78.4 mm 0-3.5 bar 1
847-15-L-CD 25 bar 0-15 Lpm 0-15 Lpm 165 mm 152 mm 78.4 mm 0-3.5 bar 1
847AR-15 40bar 135m³/h 0-15bar 0-25bar
847GN-15 40bar 135m³/h 0-15bar 0-25bar
847H2-15 40bar 135m³/h 0-15bar 0-25bar
847OX-15 40bar 135m³/h 0-15bar 0-25bar 165mm 145mm 78,4mm
847PL-15 40bar 135m³/h 0-15bar 0-25bar
847-30-L-AR 25 bar 0-30 Lpm 0-30 Lpm 165 mm 152 mm 78.4 mm 0-3.5 bar 1
847-30-L-CD 25 bar 0-30 Lpm 0-30 Lpm 165 mm 152 mm 78.4 mm 0-3.5 bar 1
847-4-LP 25 bar 76 m³/h 0-4 bar 0-6 bar 165 mm 152 mm 78.4 mm 0-4 bar 1
847PR 25bar 76m³/h 0-4bar 0-6bar
847-50-L-AR 25 bar 0-50 Lpm 0-50 Lpm 165 mm 152 mm 78.4 mm 0-3.5 bar 1
847-50-L-CD 25 bar 0-50 Lpm 0-50 Lpm 165 mm 152 mm 78.4 mm 0-3.5 bar 1

 


 

Clamping Nuts

Description: Clamping Nuts

 

Part Number Model Number Dimensions Diameter
2003 Clamping Nuts G1/4RH 17 mm
2004 Clamping Nuts G1/4LH 17 mm
2005 Clamping Nuts G3/8RH 19 mm
2006 Clamping Nuts G3/8LH 19 mm
2007 Clamping Nuts G1/2RH 24 mm
2008 Clamping Nuts G1/2LH 24 mm
2009 Clamping Nuts G3/4RH 30 mm
2010 Clamping Nuts G3/4LH 30 mm

 


 

Entry Posts

Description: Hose posts

Part Number Model Number Dimensions Diameter
20140 Entry Posts recommended for nut: G1/4RH hose size: 4 mm
20141 Entry Posts recommended for nut: G3/8RH hose size: 4 mm
20142 Entry Posts recommended for nut: G1/4RH hose size: 6 mm
20143 Entry Posts recommended for nut: G3/8RH hose size: 6 mm
20144 Entry Posts recommended for nut: G1/2RH hose size: 6 mm
20145 Entry Posts recommended for nut: G3/8RH hose size: 8 mm
20146 Entry Posts recommended for nut: G3/8RH hose size: 9 mm
20147 Entry Posts recommended for nut: G1/2RH hose size: 9 mm
20148 Entry Posts recommended for nut: G1/2RH hose size: 11 mm
20149 Entry Posts recommended for nut: G1/2RH hose size: 13 mm
20150 Entry Posts recommended for nut: G3/4RH hose size: 16 mm

 


 

Flashback Arrestors

Description: Flashback arrestor

Flashback arrestor – hose to hose type

 

Features:

  • Prevents reverse flow of gases with built-in check valve
  • Extinguishes flashback fire with sintered metal filter
  • Thermal cut-off which positively shuts off the gas in case of hose fire, burn or repeated flashbacks
Part Number Model Number Diameter
188-TTL6 188-TT øhose 1/4″(6 mm)
188-TTL8 188-TT øhose 5/16″(8 mm)
188-TTR6 188-TT øhose 1/4″(6 mm)
188-TTR8 188-TT øhose 5/16″(8 mm)

 

Part Gas Fuel Gas Connection Threads- Inlet Connection Threads- Outlet Max Flow Max Pressure O2 Max Pressure AC Max Pressure LPG Max Pressure H2
188-TTL6 Fuel Gases Fuel Gas øhose 1/4″(6 mm) øhose 1/4″(6 mm) 20,000 1.5 5 3.5
188-TTL8 Fuel Gases Fuel Gas øhose 5/16″(8 mm) øhose 5/16″(8 mm) 20,000 1.5 5 3.5
188-TTR6 Oxygen Oxygen øhose 1/4″(6 mm) øhose 1/4″(6 mm) 65,000 15
188-TTR8 Oxygen Oxygen øhose 5/16″(8 mm) øhose 5/16″(8 mm) 65,000 15